| HOLLAND JACHTBOUW Spécifications | |
| Nom: | IKARON |
| Type de bien: | Sloop |
| Année de construction: | 2000 |
| Matériau de la coque: | Aluminum |
| Longueur: | 30.48m / feet |
| Largeur: | 7.19 / 23.59 feet |
| Tirant d'eau max: | 3.63 / 11.91 feet |
| [Gross Tonnage]: | 111 |
| Vitesse de croisière: | 9 knots |
| Vitesse max: | 11 knots |
| Invités: | 8 |
| Cabines: | 3 |
| Équipage: | 4 |
| Moteurs: | 1 |
| Pavillon: | Marshall Island |
| Region: | Italy, Genoa |
HOLLAND JACHTBOUW IKARON Yacht à Vendre
Demandez des renseignements
owner cabin
• Full beam with two double beds either side
• Luxurious en-suite bathroom, with stall shower
Guest Cabins
• Two double twin cabins port and starboard forward
• Port forward cabin is equipped with an en-suite bathroom
Crew Area
• Two bunk cabins port and starboard
• Crew mess with U Shaped sofa, all electric controls
• Crew bathroom that doubles as an en-suite for the port forward guest cabin
Cockpit
• Two helm stations equipped with all sail controls
• Fantastic 360º views over and along the deckhouse
• Large table with U shaped sofa in blue leather port side
• Navigation and transmission equipment starboard side
• Steps into the upper deck salon and lower deck salon
REFIT DETAILS AND UPGRADES
2021
• Mast and rig pulled out of boat and all rigging removed for inspection
• All running rigging replaced
• Cabling, lights, and electronics checked, serviced or replaced
• Hydraulic furles serviced and rebuilt by Rondal
• Hydraulic halyard rams serviced
• Hydraulic aft stay tensioners serviced
• Hydraulic boom van serviced
• Mast & boom re-installed and tuned
• New Furuno radar and navigators installed
• New PC screens
• New cockpit resolution waterproof monitor
• New B&G processor and triton
• New Gyro-track compass installed
• All batteries serviced and or replaced
2022
• New electric motor
• Variable pitch gear box taken out, dismantled and serviced. All new
• Marine gearbox “Twin Disc” taken out and rebuild, new seals &
bearings.
2023
• Under water Hull sand blasted, inspected
• Propeller, shaft, variable pitch system and gear box works:
• Variable pitch propeller “Teignbridge” dismantled and serviced
• Propeller shaft pulled out, taken to machine shop. Installed in lathe,
checked for wear & torsion, cleaned. Was in perfect condition.
• Propeller shaft bearings serviced. oil and water seals, both engine
room side and water side, all replaced.
• Propeller shaft oil bath oil replaced
• Propeller shaft aft “cutlass bearing” replaced
• Main engine rubber support blocks replaced (all 2 )
• Propeller shaft & main engine re-aligned. Boat sea trials showed
perfect alignment.
• Rudder pulled out full service
• Rudder lower and upper bearings serviced
• Steering system & steering quadrant serviced
• New bearing Laghersmith
• Zink anodes new
• Brand new sails
• New tender Geniuss 320
Aft Deck
• Hydraulic swim platform
